SLIDE GATE
BARL slide gate are suitable for dust-shaped and fine-grained bulk materials and reliably push off the product up to a grain size of 20 mm. Wear strips, sealing strips and support areas of the sliding plate can be replaced. The four-layer all-round packing gland packing guarantees dust-tightness to the outside. A stainless steel wiper protects the packaging. Coordinate with us at system overpressure and high number of switching cycles (≥20/h). BARL slide gate can be round or square.
For a smooth passage, we recommend using an insertion hopper as wear protection, which at the same time protects the seals and guides from the product and its adhesions.
In the event of system overpressure and high switching frequency (≥20/h), please contact us.
BARL-Absperrschieber können in rund- und eckig ausgeführt werden.
STANDARD SIZE
150 x 150 to 1.000 x 1.000, DN 150 to DN 1000ACTUATION
Hand-actuated, pneumatically or by electro-motorSEALING MATERIAL
PUR, EPDM, CR-white, Viton, others on requestOPERATION
Hand-actuated, pneumatically or by electro-motorTEMPERATURE RANGE
-40° C to +900° CEX-PROTECTION
ATEX-directive 94/9 ECPRESSURE SURGE RESISTANT
up to 10 barCLAMP BOX
On request, the limit switch and solenoid valve can be routed to one or two terminal boxes as requiredWEAR PROTECTION
through surface coating, lining or replaceable insertsProdukt Request
Here you can directly submit an inquiry about a product. Please fill out the information below as completely as possible so that we can offer you the right product.